The most important aspect affecting the safe driving of vehicles is the solid tires. Tires that ensure the contact of cars with the ground are always vital. How long is the life of the tires used in vehicles? The service life of tires varies depending on the manufacturer and the use case. Vehicle users should have information about the condition and life of the tires. Tire lifetimes are calculated as km and years made with the tire. Making calculations based on years or km alone will not be a healthy determination for tire life.

Tire Change Times

The change times of the tires used in the vehicles are determined by the checks made on the tire. Tire change times can be determined according to the tire tread depth and conditions such as cracking occurring on the tire. When the tire tread depth drops below 1.6 mm, it needs to be replaced regardless of the tire age. Tire manufacturers recommend that the replacement operations be carried out as soon as they go below 3 mm. After the vehicle tires have been used for 5 years, the following checks should definitely be made.

Physical structure,

Wear condition,

Tooth depth,

Handling,

Braking performance,

If it is deemed necessary after these checks have been made, tire changes should be made at the end of 5 years.

How Long is the Shelf and Standby Life of Tires?

The manufactured tires are stored in various warehouses under appropriate storage conditions until they are delivered to the user. The shelf life of automobile tires is determined as between 8 and 10 years. Dec. Manufacturers do not provide any warranty for tires that have been waiting on the shelves for more than 10 years.

Even if the spare tires of the vehicles have never been used, they should be replaced if the waiting life exceeds 10 years. Users look at the appearance of the tires and whether there is damage. Experts, on the other hand, state that tires that have filled the shelf and standby life should definitely be replaced.

How Long Should Car Tires Be Used?

Tire manufacturing companies show production date information on car tires. In vehicles, the waiting period and service life of 10 years are determined from the date of production in order for the tires to be used safely. Based on the production date on the tire, the tire must be replaced after 10 years, even if it is new. A tire that has been waiting on the shelf for 2 years will be able to be used for 8 years after it is installed on vehicles. During this time, tooth depth and tire damage checks should be performed. When buying car tires, the date information on them should definitely be checked.

Understanding That the Life of Tires Is Over

It is understood that the life of automobile tires is over with the checks made. Under normal conditions, a lifetime of 100 thousand km and 10 years is determined for tires. As the vehicles make way, the tire tread depth level will start to decrease. When the tread depth decreases to the level of 1.6 mm, it is understood that the life of that tire is over.

Another method is that if the period between the date on the tire and the current date is 10 years or more, it means that the standby and service life of that tire is over. Dec. Tires that have been 10 years past their production date should be replaced for safety reasons, even if they look good.

Cracks That Occur in Car Tires

When car tires are being manufactured, protective layers are made on them. The protective layers will start to peel off depending on the use or by being damaged during cleaning with chemicals. These applications cause cracks to occur in the tires. The intensity of cracks occurring in the tires or the depth of cracks will pose a great risk to the tire. It indicates that the service life of the tires has expired and needs to be replaced.

Summer and Winter Tire Life

The tires used on the vehicles have different characteristics as summer tires, winter tires or all-season tires. It is recommended to use 4 seasons for winter tires. The manufacturer companies have determined the shelf life and service life for all tire types as 10 years. However, all-season tires should be checked and replaced after traveling 70 thousand km. For safe driving of vehicles, all tires must be checked when reaching 35 thousand km.

Is the Production Date of the Tire Important?

It is known that automobile tires are made by adding rubber and various additives to provide comfort. According to the types of materials used, attention is paid to reducing the wear condition and avoiding tire noise during use. The production dates of tires are important for determining the service life and safety.

Even when a new tire is to be purchased, the dates on the tire provide information about the service life of the tire. In recent years, the production dates of tires have started to appear on the tire in the form of weeks and years. It is shown as DOT 1621 with the abbreviation DOT. The year of this tire is 2021 16. It means that it is produced during the week.

Can the Tire Life Be Extended?

Automobile tires are produced according to seasonal conditions, and the tires are sensitive to temperature. Tires used in the summer period can lead to various hazards in the winter season. In order to extend the life of the tires, the tire pressures must be kept within the specified December. Checking the pressures regularly and keeping them at the same level will reduce tire wear.

In order to extend the life of the tires, it should be noted that;

Asphalt roads should be preferred,

Tires suitable for the season should be used,

Cosmetic products should not be used in tire cleaning,

Tires of the sizes recommended by the factory should be used,

When vehicle users pay attention to these issues, they will be able to use the tires on their vehicles without problems until they complete their service life. When tire pressures are not controlled, the tires will start to wear out from the side surfaces along with the teeth due to the low pressure, which will shorten the life of the tire.

Using Old Dated Tires

Those who want to change the tires of their cars prefer to use old tires in order to find cheaper tires. It is possible to reach different explanations for the service life of tires. The service life of the tires has been determined as 10 years. Old dated tires can be continued to be used if they have not completed this service life and no damage has occurred anywhere.

tires that are over 10 years old will start to lose their flexibility, no matter how new they look. When vehicles are going at high speed, they need more tire flexibility. Old tires can cause various problems, as they will lose their elasticity.

There are many parts in cars that are important in our daily life. Electricity is needed for a vehicle to move, for electronic parts to work. This electricity is provided by the battery when the vehicle is not running and by the alternator called the charging dynamo when the vehicle is running.

The power of the alternator is taken directly from the engine. The electricity it produces is high voltage. Some of the parts in the vehicle are not internally malfunctioning when connected due to this high incoming voltage. The system that controls the electricity generated by the alternator is called a connector. This part sees the balancing process in current and voltage when the vehicle speed increases. Due to this, a malfunction in the vehicle will be prevented.

What is a Connector, What Is It Useful For?

The alternator, which is an important part for vehicles, performs the function of balancing the generated electricity on volts and current. Many of the vehicles have an alternator and a charging dynamo. The electricity generated from the alternator is transmitted to the installation section. The connector that is activated at the transmission point comes to the fore. Allows the system to stay at a certain voltage. Spark plugs and headlights and the provision of electricity to the battery are of great importance in vehicles due to the fact that they are realized through the connector. It plays an important role in preventing the battery from depleting and transferring it to the vehicle continuously and regularly.

Why Does the Connector Malfunction Occur?

The long-term and healthy movement of vehicles that are important for human life takes place with the battery. Therefore, it is important that the battery is always full. In order for this to happen, it must be ensured that the electricity generated together with the electricity obtained is supported by a battery.

The part that controls the electricity obtained by the alternator with volts and current is the connector. It ensures that the battery is constantly full. If there is a connector failure, there is no electricity to the vehicle. All the elements that need electricity do not function. With the battery running out over time, the vehicle does not move. It is important for those who do not want to experience connector failures to check their vehicles periodically.

Causes of Electrical Connector Failure

There are many reasons for electrical connector failures that occur in automobiles.

The causes of malfunctions that usually occur can be listed as follows;

(Corrosion) Problems with rusting

Aging of cables

(Corrosion) Problems With Rusting

Car engines get air from everywhere. It is exposed to extreme heat in summer and extreme cold in winter. As a result, depending on such weather conditions, the connector rusts and corrodes over time. This prevents the connector from working.

Problems Caused by Aging of Connector Cables

Seasonal weather conditions in the vehicles used may cause the cables coming to the connector to wear out over time. Tears formed on external surfaces cause a short circuit. This prevents the use of electricity in the car.

Signs of Connector Failure

As a result of the faults related to the connector that occur in the vehicle, it also negatively affects many parts in the vehicle.

The main connector failures are;

If there is a constant explosion of headlights and taillights in the vehicle,

If there is a difficulty in starting the vehicle,

If there is a problem with the glow plugs,

If automatic transmission failures are present

It should be understood that there is a connector malfunction and solutions should be produced to solve the problems as soon as possible.

How Do Motorcycle Connectors Work?

The connectors available on motorcycles are in the same parallel as other connectors. They assume the duties of organizer and distributor. It regulates the electrical current inside the vehicle and, in addition, the volt setting by changing the adjustment levels as the engine speed increases.

The set current and voltage are sent to the installation by the battery. In this way, the operation of the vehicle is ensured. The connectors have an easy installation feature, their robustness is a little more delicate than motorcycles. Therefore, it is proper behavior to be careful during installation operations.

Causes of Motorcycle Connector Failure

Motorcycle connectors can also malfunction over time. The vehicle may not start when this happens. The source of the problem is obvious. It may be caused by burning or ruptures in the electrical cables of the connector. In this case, the connector cannot perform its task because electricity cannot pass through the cables. Another reason may be the obsolescence of the connector. A connector that has not been used for a long time may not be able to perform its task with as high an efficiency as before. Such problems can be found in any electronic device.

If the vehicle generates too much heat, it can be seen as a connector failure. The fact that the radiator does not work may cause the connector to heat up or even burn. Even if there is no problem caused by the connector, the displacement of this part may still cause problems. Reassembling the part in place eliminates the problem.

How to Tell Motorcycle Connector Failure?

The working quality of the engine that has been used for a long time can provide information about whether there is a malfunction in this regard. Pressing the starter for a long time indicates a connector failure. If it does not work at all despite pressing the starter, it should again be perceived as a connector failure. The fact that the engine stops at once indicates that the same fault is present. Failure of the vehicle to comply with the operating principles indicates that there is a connector problem.

How is Connector Failure Detection Performed?

An avometer is used to determine that the malfunction that occurs in vehicles is caused by the connector. With this tool, the energy received by the battery is measured. The measurement is made when the vehicle is started by connecting the instrument to the vehicle. If the energy value received by the battery remains below normal values, this is a sign that the connector does not transmit the required energy to the battery. In this way, the fault caused by the connector is detected.

Is the Quality of the Connector Important?

Even if the connectors are parts that have a small structure and seem insignificant, it is the part that is important to get efficiency from the vehicles and operate the vehicle. It makes sense to install the quality part when the part change is made. When the quality part is not used, it is possible to experience a failure related to the connector.

Although quality parts are expensive compared to others, their long service life eliminates the difference, as they do not cause problems. The use of poor quality parts constantly triggers the replacement of parts. In this case, it will be expensive.

Engine oil prevents metal parts from rubbing against each other and wear of these parts. There are various additives in the engine oil. Thanks to these additives, it prevents wear and friction. For this reason, engine oil plays an important role.

When engine oil is not used, all parts of the engine are doomed to deteriorate within a short period of time. Quite large damages occur in the engine used without engine oil. If you want your car to run smoothly, you definitely need to use engine oil. However, there are many types of motor oils on the market. It is of great importance to choose the most accurate and highest quality among these oils. Deca. So what should I pay attention to when buying motor oil?

Criteria That Should Be Considered When Buying Engine Oil

When buying engine oil, you need to look at the following criteria:

The authenticity of the oil

The recommendation of vehicle manufacturers

Brand engine oils

Filling date

Vehicle feature

Type of fuel

Engine displacement

You should buy motor oil by paying attention to such criteria. Each of these criteria has a separate significance. These criteria should always be taken into account in order to get a good and high-quality engine oil.

Make Sure That The Oil Is Original

The number of engine oil types is quite large. For this reason, there are also non-original engine oils. The presence of fake oils on the market has caused the original-fake distinction to be made. One of the main issues that you should pay attention to when buying engine oil is the authenticity of the oil. If you buy a fake engine oil, your engine will deteriorate over the long term. Therefore, the authenticity of the oil is very important. You should not take engine oils that open the lid. You should not put motor oils that are sold openly because they are cheap in your vehicle.

Get the Engine Oils Recommended by Vehicle Manufacturers

Some vehicle manufacturers recommend to you the engine oil that they consider suitable for their vehicles. Thus, they help car owners to buy the right engine oil. Car owners should pay attention to manufacturers in order not to have problems with visicosity. Improper use of engine oil is one of the main reasons that shorten the life of the vehicle.

Try Not to Buy Engine Oil from an Unknown Brand

There are more than one motor oil brands on the market. However, some of these brands are not reliable. Some manufacturers sell motor oil that is fake or contains different substances in it. But there are brands that are quite professional about motor oil. If you know which of these brands are, you can get the right engine oil. Especially the sale of motor oil is also carried out over the Internet.

You need to make more careful choices in such online purchases. It is important that the brand is a recognized name. Some manufacturers give a low price to get fake engine oils out of their hands. Car owners buy these oils just because they are cheap. Unfortunately, however, this scam can lead to a malfunction of the vehicle engine. Therefore, do not hesitate to charge high fees for motor oil of well-known brands.

Look at the Filling Date

Engine oils contain substances that do not contain easy degradation. Therefore, it does not have an expiration date. However, the filling date of the engine oil is important. When buying engine oil, it is necessary to look at the filling date. The filling date is important in order to get maximum efficiency from oil. If the engine oil has been filled before 1 year, you should not buy that engine oil. It is enough that the filling has been no more than 1 year. It is also necessary not to ignore the Decanter date for engine oil efficiency.

Look at the Values of the Engine Oil

When buying engine oil, you also need to look at the values of the engine oil. You should buy engine oil that has normal and appropriate values. If you do not know anything about these values, you can get help from people who are experts in motor oil. If the values are lower than normal, it will cause your engine to break down in a fairly short time. For this reason, never neglect to look at the engine oil values.

Take Into Account Your Vehicle Characteristics

Not every car has to use the same engine oil. The characteristics of the vehicle determine which engine oil you will use. For this reason, you should know the characteristics of your vehicle well. You should buy the engine oil that best suits the vehicle specifications. The characteristics of each vehicle are not the same. For this reason, it is normal not to use the engine oil used by another vehicle.

You Should Pay Attention to the Type of Fuel

There are vehicles that run on diesel, gasoline or gas. Whichever of these types of fuel you are using, you should buy engine oil according to it. You can find out which type of fuel and which engine oil to buy from experts. If you are experiencing any uncertainty about this, you can also consult the manufacturer when buying engine oil. Engine oils that are not suitable for the fuel type may cause some damage to your vehicle. For this reason, experts say that when buying engine oil, the type of fuel should also be considered.

The Volume of the Engine Should Be Considered

The engine volume should be appropriate for the engine oil. For this reason, you should buy your engine oil accordingly. You need to know the volume of your engine before buying engine oil. You need to pay attention to buying the engine oil that is most suitable for the volume.

The Engine Structure Should Be Looked At

The engine structure of every car is not the same. Before buying engine oil, you need to check your engine structure and have information about your engine structure. After determining the engine structure, you can buy engine oil. Some engine oils are produced according to special engine structures. If you can make this distinction, you can find the engine oil that is specific to your engine.

Regularly Used Engine Oil Should Be Taken

If there is an engine oil that you have used before, you should take it from that engine oil again. After you have found the most suitable engine oil for your vehicle, be careful to use that oil constantly. Thus, using an oil that your engine is used to makes it easier for both you and the engine.

Everything you need to pay attention to when buying engine oil is given above. Taking into account these considerations, you need to choose an engine oil. Buying a random engine oil will not do you any good. On the contrary, it causes significant damage to your engine structure.

As Nipar Automotive Inc., we participated in the Autotech Cairo Fair held in Egypt to explore opportunities in the Middle East and African automotive markets and strengthen our business partnerships. During the fair, we showcased our innovative products and services while connecting with industry professionals. We extend our heartfelt thanks to all the customers who visited our stand and supported us!

As Nipar Automotive Inc., we participated in the CTO Expo Fair held in Russia to stay updated on global innovations in the automotive sector and connect with our international business partners. At this event, we had the opportunity to showcase our innovative products and services while exploring new export and collaboration opportunities. We would like to extend our gratitude to all the customers who visited our stand and added value to us!

As Nipar Automotive Inc., we participated in Automechanika Dubai, one of the most prestigious international events in the automotive industry. At this fair, we had the opportunity to explore innovations in the Middle East, Asia, and African markets while expanding our global business network. We proudly showcased our high-quality products and solutions. A heartfelt thank you to all our customers who visited our stand and added value to our presence!

As Nipar Automotive Inc., we participated in the 2024 Automotive Poland Fair, one of the leading events in the European automotive sector. At this prestigious organization, we had the opportunity to showcase our innovative products and high-quality parts manufactured to OE standards. Strengthening collaborations with industry professionals from Poland and around the world, we continue to make solid strides in the global market. We extend our heartfelt thanks to all the customers who visited our stand and supported us!