What is a Connector?
There are many parts in cars that are important in our daily life. Electricity is needed for a vehicle to move, for electronic parts to work. This electricity is provided by the battery when the vehicle is not running and by the alternator called the charging dynamo when the vehicle is running.
The power of the alternator is taken directly from the engine. The electricity it produces is high voltage. Some of the parts in the vehicle are not internally malfunctioning when connected due to this high incoming voltage. The system that controls the electricity generated by the alternator is called a connector. This part sees the balancing process in current and voltage when the vehicle speed increases. Due to this, a malfunction in the vehicle will be prevented.
What is a Connector, What Is It Useful For?
The alternator, which is an important part for vehicles, performs the function of balancing the generated electricity on volts and current. Many of the vehicles have an alternator and a charging dynamo. The electricity generated from the alternator is transmitted to the installation section. The connector that is activated at the transmission point comes to the fore. Allows the system to stay at a certain voltage. Spark plugs and headlights and the provision of electricity to the battery are of great importance in vehicles due to the fact that they are realized through the connector. It plays an important role in preventing the battery from depleting and transferring it to the vehicle continuously and regularly.
Why Does the Connector Malfunction Occur?
The long-term and healthy movement of vehicles that are important for human life takes place with the battery. Therefore, it is important that the battery is always full. In order for this to happen, it must be ensured that the electricity generated together with the electricity obtained is supported by a battery.
The part that controls the electricity obtained by the alternator with volts and current is the connector. It ensures that the battery is constantly full. If there is a connector failure, there is no electricity to the vehicle. All the elements that need electricity do not function. With the battery running out over time, the vehicle does not move. It is important for those who do not want to experience connector failures to check their vehicles periodically.
Causes of Electrical Connector Failure
There are many reasons for electrical connector failures that occur in automobiles.
The causes of malfunctions that usually occur can be listed as follows;
(Corrosion) Problems with rusting
Aging of cables
(Corrosion) Problems With Rusting
Car engines get air from everywhere. It is exposed to extreme heat in summer and extreme cold in winter. As a result, depending on such weather conditions, the connector rusts and corrodes over time. This prevents the connector from working.
Problems Caused by Aging of Connector Cables
Seasonal weather conditions in the vehicles used may cause the cables coming to the connector to wear out over time. Tears formed on external surfaces cause a short circuit. This prevents the use of electricity in the car.
Signs of Connector Failure
As a result of the faults related to the connector that occur in the vehicle, it also negatively affects many parts in the vehicle.
The main connector failures are;
If there is a constant explosion of headlights and taillights in the vehicle,
If there is a difficulty in starting the vehicle,
If there is a problem with the glow plugs,
If automatic transmission failures are present
It should be understood that there is a connector malfunction and solutions should be produced to solve the problems as soon as possible.
How Do Motorcycle Connectors Work?
The connectors available on motorcycles are in the same parallel as other connectors. They assume the duties of organizer and distributor. It regulates the electrical current inside the vehicle and, in addition, the volt setting by changing the adjustment levels as the engine speed increases.
The set current and voltage are sent to the installation by the battery. In this way, the operation of the vehicle is ensured. The connectors have an easy installation feature, their robustness is a little more delicate than motorcycles. Therefore, it is proper behavior to be careful during installation operations.
Causes of Motorcycle Connector Failure
Motorcycle connectors can also malfunction over time. The vehicle may not start when this happens. The source of the problem is obvious. It may be caused by burning or ruptures in the electrical cables of the connector. In this case, the connector cannot perform its task because electricity cannot pass through the cables. Another reason may be the obsolescence of the connector. A connector that has not been used for a long time may not be able to perform its task with as high an efficiency as before. Such problems can be found in any electronic device.
If the vehicle generates too much heat, it can be seen as a connector failure. The fact that the radiator does not work may cause the connector to heat up or even burn. Even if there is no problem caused by the connector, the displacement of this part may still cause problems. Reassembling the part in place eliminates the problem.
How to Tell Motorcycle Connector Failure?
The working quality of the engine that has been used for a long time can provide information about whether there is a malfunction in this regard. Pressing the starter for a long time indicates a connector failure. If it does not work at all despite pressing the starter, it should again be perceived as a connector failure. The fact that the engine stops at once indicates that the same fault is present. Failure of the vehicle to comply with the operating principles indicates that there is a connector problem.
How is Connector Failure Detection Performed?
An avometer is used to determine that the malfunction that occurs in vehicles is caused by the connector. With this tool, the energy received by the battery is measured. The measurement is made when the vehicle is started by connecting the instrument to the vehicle. If the energy value received by the battery remains below normal values, this is a sign that the connector does not transmit the required energy to the battery. In this way, the fault caused by the connector is detected.
Is the Quality of the Connector Important?
Even if the connectors are parts that have a small structure and seem insignificant, it is the part that is important to get efficiency from the vehicles and operate the vehicle. It makes sense to install the quality part when the part change is made. When the quality part is not used, it is possible to experience a failure related to the connector.
Although quality parts are expensive compared to others, their long service life eliminates the difference, as they do not cause problems. The use of poor quality parts constantly triggers the replacement of parts. In this case, it will be expensive.